HF·C Series High Quality Fiber Laser Cutting Machine
The advantage of the HF·C series cnc sheet cutting machine
- High cutting efficiency, high cost performance and low running cost
● High cutting performance for copper/brass, aluminum, stainless steel and carbon steel
Hylaser 2.0 professional laser cutting control system, based on the new generation of Beckhoff numerical control system, which is highly intelligent. This system can be customized according to the actual requirements of customers, so as to enrich the application of process database. Meanwhile it can be equipped with a large screen display, which makes this system more easy to operate.
● EtherCAT communication technology
As Hymostar’s super brain – EtherCAT control platform, all modules are based on EtherCAT technology control and data calculation, All the operation is safe, reliable, self-diagnosis, open.
● Friendly human-machine interface
Full touch screen operation, easy to operate, graphics operation function is clear, which helps to improve production efficiency.
● Remote diagnosis
The system is equipped with remote diagnosis module, customers can contact Hymostar engineers about the equipment problems for remote assistance to solve.
● Real-time monitoring of equipment running status
The system integrates monitoring function, which can monitor the running state of the equipment in the maintenance interface, and monitor the alarm, moving shaft, laser, cutting head, workbench, gas path and I/O.
Features of Optical fiber cutting machine：
1. Cutting Technology of fiber laser cutting machine:
▲ Leapfrog Cutting、Automatic Obstacle Avoidance、Lightning Cutting
▲ Rapid Perforation、Breakpoint Resume、Arbitrary Point Cut-in
▲ Gradual Speed Regulation in Tool Start、Aluminum Alloy Burr-free Cutting (Optional)
▲ Fly-cutting High Speed Cutting
2. Sheet Welding Machine Base with Mortise and Tenon Structure
Super rigid machine base proven by coin test.
● Utilize state of the art welding technology to form the machine tool base.
● Heat treatment to strengthen the intensity and stiffness of base.
Standard industrial machine tool processing procedure
3.Aircraft Aluminum Extrusion for Gantry Beam
4.Master 6000 Control System
|Handheld Control||The remote wireless remote controller allows the operator to perform the most operations from any convenient location: starting and stopping the program, lighting out, following, reversing the contour, increasing/decreasing the focal length, changing the feed rate, and outputting machine parts.|
|Compressor||Screws, air-cooled, with sound-insulated housing, receiver, desiccant, and ancillary equipment for air cutting up to 16 atmospheres.|
|Vertical low-temperature gasifier||Used as a replacement for standard cylinders when used for cutting gas consumption increases. (eg: cutting stainless steel)|
|Operator safety glasses||Direct, reflected and scattered laser beams may damage the operator’s vision and may even lead to blindness. In order to protect the eyes from laser radiation, special protective glasses should be used.|
|Exhaust fan||Used to remove the combustion products produced during the cutting process.|
|Filter – Ventilation||Filters – Ventilators are designed to remove suspended, fine and moderately dispersed dust and smoke from air during welding, metal thermal cutting, etc.|
|Supplies accessories||Protective glasses, nozzle.|
5. Why choose Hymson laser
● Intelligent dust exhaust system: Work on the cutting area only, strengthen the ventilation effect.
● Intelligent gas control system: save gas up to 50%
● Auto-focusing: accurate, fast and smart
● Full-automatic lubrication system: Auto lubricate the gear and rack, maintenance free.
● Installation/training & support by global factory trained engineers.
6. Simple and Practical Cutting Software
We provide Master 6000 fiber laser cutting machine software with complete functions. With rich functions, the software highly simplifies and optimizes the cutting process to significantly improve the operator’s work efficiency and production efficiency.
7. Automatic Switching between Marking and Cutting Modes
The marking and cutting modes are separately set by the operator before the commencement of cutting. The operator may reconfigure the machine and input new settings without stopping the material handling process. The switching between modes is automatic, which improves the productivity of compound cutting.The operator conducts setup before starting the processing without stopping the material handling.
User’s Machine Installation Site Condition Preparation
|1||Power Supply Capacity: ≥60KVA|
|2||Power Supply Requirements: (1) Three-phase voltage stability＜±5%; (2) Unbalancedness of three-phase power supply < 2.5% (Note: Abrupt changes in supply voltage and sudden power failure are not allowed, otherwise, the laser may be damaged easily. Good grounding is required (ground resistance < 3 Ohm).|
|3||Compressed Air Supply Requirements:
(1) Air supply capacity: ≥ 0.8m3/min (2) Air supply pressure: ≥ 7bar
(3) Dewpoint ≤ 5℃ (4) Oil content ≤ 0.01ppm Solid particle ≤ 0.01μm
|4||Auxiliary gas for cutting: Oxygen (O2)/ Nitrogen (N2): Purity ≥ 99.99%|
|5||Sheet (Tube) Cutting: Black skin, smooth, level, rustless, evenly rolled, reaching the ISO standard.|
|6||Installation Site Requirements: 1. The foundation for equipment installation does not settle and should be constructed according to the foundation drawing provided by Party B; 2. Temperature Requirement: [5-30]℃; 3. Humidity Requirement: < 70%; 4. After the equipment is installed and commissioned, separate the laser and install an air conditioner.|
|7||The equipment operator should have been graduated from a secondary specialized school or above and have the experience in operation of computers and general numerically-controlled lathes. The equipment should be equipped with a programming computer.|
Installation and Commissioning
- All the equipment provided under the contract should be installed and commissioned by Hymson. After the contract is signed, we will determine the specific installation location of the equipment in the shortest time and provide the equipment foundation drawing within 5 working days after the contract goes into effect. Prior to the installation and commissioning, you should prepare the equipment foundation strictly according to the requirements specified in the equipment foundation drawing provided by Hymson. After the installation site is ensured, the engineers will install and commission the equipment with the tools they carry and, within 10 days, complete the installation, commissioning, technical index tests, training, acceptance and delivery for use;
- The expenses related to the installation and commissioning and the staff assigned should be borne by Hymson.
Transportation and Logistics
- The place of delivery should be your installation site.
- Standard packaging suitable for long-distance transportation by truck, being dampproof, rust-proof and shockproof; suitable for integral hoisting and indicating the centre of gravity for lifting and the hoisting position;
- Mode of Transport: Motor transport. We should bear the freight and insurance.
- Each packaging box should be accompanied by a detailed packing list and a quality certification as well as the instructions on the equipment and other documents and materials. The packing list should be outside the packaging box and the quality certification should be inside the packaging box.
1. Welcome to send sample material to us for testing laser marking engraving for you.
2. We offer pictures, videos and other relevant documents for you to know more about the machine.
3. We are online and would respond fast to answer all your questions.
4. If you have chance visiting China, you are warmly welcome to visit our factory.
1. Any parts have a quality problem during the warranty period, We will send you a new replacement for free. And Customer affords the replacement shipping cost.
2. The training video, detailed manual, and catalog sent with the machine. The customer could study the operation of the machine by watching the clear training video.
3. If there is a technical problem or new inquiry, Hymson has a fast response to service support by online or email even if need by the phone call.
4. Professional technical support and after sales following up. A free software update.
|Working Range (mm)||4000 x 2000||6000 x 2000||6000 x 2500||8000 x 2500|
|Max. Workpiece weight (kg)||80|
|Max. Workpiece Thickness (3000W)|